ID # 27681484

STIHL MS 151 TC-E 12” Bar

Call for Price
STIHL MS 151 TC E 12” Bar STIHL's Lightest Top-Handle Chain Saw

The MS 151 T C-E is not only extremely lightweight, but provides great maneuverability to tackle any in-tree work. It comes fitted with a 1/4" PM3 saw chain for a quick and precise cut. It's also fitted with a manual fuel pump and STIHL's Easy2Start™ technology, so that the saw starts quickly and you can get on with the job at hand. Available with a 12" bar.



MS 151 TC-E
Sale Type
1/4" PM3
Technical Data
Weight (kg / Lb)
2.6 / 5.7
Displacement (cc)
Power Output (kW)
Guide Bar Lengths (Recommended Ranges)
Weight (kg / Lbs) / Without Fuel, Bar And Chain
2.6 / 5.7

STIHL Easy2Start (E) STIHL Easy2Start (E)

A genuine advance in easy starting. STIHL Easy2Start (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.

Side-mounted chain tensioning Side-mounted chain tensioning

The tensioning screw can be found on the side of chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

Tool free fuel caps Tool free fuel caps

Special caps to open and close the tank cap quickly, easily and without tools.

Advanced combustion technology Advanced combustion technology

Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

Reduced-emission engine technology Reduced-emission engine technology

2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

STIHL anti-vibration system STIHL anti-vibration system

Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.